Voltage Controlled Switch 16 Amp
These
high performance low voltage disconnects increase battery
life by preventing excessive battery discharge.
When the battery voltage is too low the control
automatically switches the load off. When the battery
voltage has recovered the control turns the load back on.
In this way the battery is protected from excessive
discharge.
Direct
replacement for Bobier 16/8 LVD.
Tough
Design
-
A rugged design sealed in an ABS case with epoxy. Operates
continuously at +70C (+160F) at 16 Amps.
Easy
to use
-
Momentary reset switch on the side turns on the load when
pushed regardless of battery voltage.
Full 5-year warranty. Your satisfaction is always
guaranteed!
Models: LVD16-12 (12 volts) or LVD16-24 (24 volts) add -H
for Certification Class I Div II
Features
•
Low Battery consumption
• Extreme temperature range -40° to +70°C (-40° to
+160°F)
• Encapsulated in epoxy potting
• Adjustable voltage set-point
• Manual momentary reconnect switch
• No radio interference
• 5 year warranty
• Manufactured with solar power
• Designed and built in North America
Electrical
Specifications
Voltage
configurations 12 or 24 volts (max continuous voltages 16V
and 32V)
Max. current (at 70°C) 16 amps DC
Power Consumption Relay Off: 1.5 mA
Power Consumption Relay On: 92 mA (12V) 44 mA (24V)
16 gauge wire leads
Typical set points: On: 13.0 Volts Off: 12.1 Volts (user
adjustable approximately from 12.1 on 11.1 off to 13.6 on
12.5 off)
General
Specifications
Temperature
range: –40°C to +70°C (-40°F to +160°F)
Case: ABS case, sealed in epoxy. (except for voltage
adjustment on back)
Weight: 125 grams
Size(H x W x D): 5.1 x 5.1 x 3.8 cm (2 x 2 x1.5 inches) not
including mounting tabs or push button switch
Mounting: wall mountable
Features
& Options
Relay
type. Built in load snubbing diode.
Optional CSA Approval C22.2 14 and Class 1 Div II, CD.
Alternate output on when voltage is low.
Low Voltage Disconnect
Instructions
(448kb pdf file)