Site logo
IMG_4000
5 Amp 3 Stage PWM - Solar Control for extreme environments
• Extreme temperature –40° to +85°C (-40° to +185°F)

Model: S5-HT (-24V)

Features
• Protection (PV & Batt), against short-circuit* & reverse polarity*, overload, over temperature & battery removal (*except 24V model)
• Extreme design –40° to +85°C (-40° to +185°F)
• Temperature Compensation
• Reliable - 100% solid state
• Fully encapsulated in epoxy potting
• 5 year warranty
• Manufactured with solar power
• Designed and built in North America

Electrical Specifications
Voltage configurations 12 or 24 volts (custom voltages 6 to 36 volts)
Consumption 0.2 mA at night, 0.7 mA, 2.5 mA when charging
Max. input 40 volts (12V control), 60V (24V control)
Max. Charging current 5 amps DC
Status Light: 1 LED (3 flashes charging, 2 flashes at Bulk Voltage, 1 flash in Float Mode)
Regulation method Pulse Width Modulation PWM, positive side switching
Typical set points: Bulk:14.4 Volts, Float:13.6 Volts, Temperature Compensated (custom voltages available)

General Specifications
Temperature range: –40° to +50°C or +120°F
Case: ABS case, completely sealed in epoxy
Weight: 140 grams or 5oz.
Size(H x W x D): 6.7 x 9.6 x 1.8 cm (2.6 x 3.8 by .8 inches)
Wire: 14 gauge leads 5 inches long
Mounting: wall mountable

Options
PWM Off (to ensure no radio interference)
Temperature Compensation Off
Custom voltage setpoints
Custom wire lead lengths
Lithium Battery (no charging below 4C)

Install Manual (pdf)

S5-HT
Voltage